4"/5'' 2008-2010 Ford 6.4 Powerstroke Cat & DPF Delete Race Pipe | SPELAB

---tab Description---

Most post-2007 diesel vehicles are fitted with a Diesel Particulate Filter (DPF) for emissions reasons, however there are a few disadvantages to this device; including constant maintenance and repairs.

Because the DPF clogs up, it increases backpressure. Due to this pressure, the fuel flow is hugely disturbed and slowed down. Therefore, when you remove this filter, the fuel flows much easily and faster, increasing the overall fuel mileage.

Specification

Benefits

Expect to see a significant increase in fuel mileage. If your DPF is plugged up your probably averaging about 13-14 mpg. More or less depending on the severity of the restriction. After deleting the DPF/CAT expect to get a combined mileage of 18-19 mpg.

• It removes the need to service the DPF at regular intervals (cleaning, replacement)
• A DPF delete will remove the possibility of a DPF failure which could cause expensive diesel repairs
• Due to less exhaust backpressure, the DPF delete increases exhaust flow and therefore increases the performance of your motor!
• Paired with an ECU remap, the DPF delete is proven to increase power and torque for all vehicles

Installation

2008-2010 6.4L Powerstroke 4'' DPF Race Delete Kit Instruction 

Install takes about 1hr with basic hand tools done on the ground of your driveway or garage. Quicker if you have automotive style lift. Cutting may be be required to fit shorter wheelbase bed/cab configurations. Clamps, hangers and hardware are included. You may have to re-use some factory hardware.
Tuner Required: Removal of the DPF, CAT, SCR, and/or DOC involves removing and eliminating emission related sensors. A DPF delete capable tuner is required to prevent any check engine light or diagnostic trouble codes from setting.

---tab Fitment---

2008-2010 Ford F-250 F350 F450 Super Duty Powerstroke 6.4 Diesel. Crew cab short bed & crew cab long bed. Also fits Cab & Chassis trucks.

---tab FAQ---

Q1. What’s the difference between 4" and 5" exhaust systems?

• 4" – Better for mild/moderate tunes, retains some backpressure for low-end torque.
• 5" – Best for high-horsepower builds, maximizes flow for reduced EGTs and top-end power.

Q2. Will a magnet stick to this pipe? Is it really stainless steel?

Yes – This pipe uses T-409 stainless steel, which is still magnetic (unlike T-304). It offers excellent corrosion resistance while being more affordable than T-304.

Q3. How thick is the pipe? Will it last?

2mm thick T-409 stainless steel – Durable enough for long-term use without excessive weight.

Q4. Will this improve performance?

• Yes! Benefits include:
• Lower EGTs (Exhaust Gas Temperatures)
• Faster turbo spool
• Better fuel efficiency (with proper tuning)
• No more DPF clogging issues

Q5. Is this street legal?

⚠ Off-Road Use Only – DPF removal is illegal for on-road vehicles in most regions. For competition/racing use only.

---tab Shipping & Returns---