Collection: DPF Delete Exhaust

In diesel performance upgrades, Straight Pipe and DPF Delete are often discussed together. The former focuses on optimizing exhaust flow, while the latter removes emissions control devices—together, they form a key strategy for maximizing exhaust efficiency and unleashing engine power in diesel vehicles.

At dieselperf, a straight pipe setup typically includes a DPF delete as part of a full exhaust upgrade system. However, they are not entirely synonymous—DPF delete specifically targets the removal of emissions-related components, whereas a straight pipe aims to create a fully unrestricted exhaust path from the turbocharger to the tailpipe.

A Straight Pipe Exhaust system eliminates the muffler, catalytic converter, and DPF filter, allowing exhaust gases to exit the engine through the shortest, most direct route. This significantly reduces backpressure, improves turbo spool-up, lowers exhaust gas temperatures (EGTs), and increases fuel economy.

On the other hand, a DPF Delete involves physically removing the Diesel Particulate Filter and reprogramming the ECU to disable the DPF regeneration function—resulting in a fully liberated exhaust system.

To better understand why a DPF delete delivers such dramatic performance improvements, it's helpful to first look at the components that make up a factory DPF system:

Component NameFunctionDPF FilterCaptures particulate matter (PM) in exhaust gases to reduce pollutionDifferential Pressure SensorMonitors pressure difference before and after the DPF to detect cloggingTemperature SensorsMonitor exhaust gas temperature to determine if regeneration is neededNOx / O₂ SensorsAnalyze nitrogen oxide or oxygen levels to adjust emissions managementECU (Electronic Control Unit)Receives sensor data and manages the DPF regeneration cycleFuel Injection for RegenerationInjects extra fuel into the exhaust to raise temperatures for soot burnoffDPF Warning LightIlluminates when DPF is clogged or malfunctioning

While these factory components are designed to comply with emissions regulations, they can also cause significant drawbacks: restricted exhaust flow, increased fuel consumption, frequent maintenance, and excessive engine temperatures.

With a dieselperf DPF Delete Kit, you can precisely eliminate these components and disable DPF regeneration through ECU tuning—delivering noticeable gains in horsepower, responsiveness, and reliability.

The diesel particulate filter (DPF) traps soot to meet emissions standards—but often causes exhaust restriction, higher EGTs, and increased fuel consumption. A DPF delete kit from dieselperf replaces the factory filter system with free-flowing delete pipes, enabling your engine to breathe properly and respond faster under load.

Diesel Particulate Filter (DPF) removal involves physically removing the filter from the exhaust system and reprogramming the vehicle's ECU (Engine Control Unit) to disable associated functions. This step is critical to preventing trouble codes, limp modes, and other operational issues. Specialized tools or diesel particulate filter removal kits are used to perform this process and ensure that the system runs smoothly without the diesel particulate filter.

dieselperf's diesel DPF delete kits deliver a powerful combination of real-world performance gains and long-term reliability. Here’s how our systems perform when paired with proper tuning:

Pros (with Realistic Performance Ranges):

Horsepower Gains:
Expect +35 to +120 HP, depending on engine type, tuner, and supporting mods
(e.g., 6.7L Powerstroke sees ~+80 HP with full delete + tune)

Torque Increase:
Up to +120 to +250 lb-ft of torque for heavy-duty applications like Cummins and Duramax engines

Faster Turbo Spool & Throttle Response:
Reduction in turbo lag by 15–30%, with smoother mid-range power delivery

Fuel Economy Boost (MPG):
Gain +1 to +3 MPG under consistent load or towing scenarios
(Varies with driving style, weight, and elevation)

Eliminate Regen Cycles / dpf regeneration:
Regeneration DPF cycles typically occur every 300–500 miles, saving downtime and fuel

Lower EGTs (Exhaust Gas Temps):
Drop of 100°F to 300°F under full throttle or towing loads, preserving engine life

Durability & Materials:
Built from T304 stainless steel or aluminized steel, rated for temps up to 1,600°F
(5-year to lifetime corrosion resistance depending on model)

A true diesel exhaust upgrade goes beyond just a DPF delete pipe. At SPELAB, we offer a complete lineup—from Exhaust Tips and Mufflers to full Turbo-Back Exhausts—designed for Powerstroke, Duramax, and Cummins platforms. Whether you're optimizing sound, power, or airflow, we have you covered.

Exhaust Tips & Mufflers
Focused on tailpipe aesthetics and sound tuning, these components fit most DPF-Back or Turbo-Back systems. Available in 4” and 5” diameters, compatible with LML, L5P, 6.7L Cummins, and more.

DPF Delete Race Pipe / Dual DPF Delete Pipe
Replaces the stock DPF unit with a free-flowing pipe. Dual pipe options are designed for twin-turbo setups like L5P, improving flow and turbo balance.

DPF & Cat Delete Pipe with Muffler
A combined unit that removes both DPF and catalytic converter, often paired with a muffler for a more refined sound. Ideal for 6.7L and 6.4L Powerstroke applications.

DPF-Back / Downpipe-Back (DP-Back)
These systems start either after the DPF or after the downpipe, preserving front-end factory emissions equipment. Great for moderate performance builds.

Turbo-Back Exhaust System
Replaces the entire exhaust from the turbo outlet to the tailpipe. Best suited for full delete builds, racing, or towing, especially when combined with a 5 inch turbo back exhaust setup.

All components are crafted from T304 stainless steel or aluminized steel for unmatched durability, delivering a true straight pipe exhaust experience from start to finish.

Each diesel DPF delete kit can be paired with our EGR delete kit, DEF delete kit, or DEF fluid elimination kit for a full emissions system overhaul.

Whether you're driving a Ford Super Duty, Ram Heavy Duty, or Chevy Silverado HD, SPELAB offers precision-fit diesel exhaust solutions tailored for the top three platforms: 6.7L Powerstroke, 6.6L Duramax, and 6.7L Cummins.

Our lineup includes DPF delete pipes, race pipes, turbo-back exhausts, mufflers, and downpipes, fully compatible with nearly every major model from 2001–2025.

Powerstroke Coverage (Ford F250 / F350 / F450)

6.7L Powerstroke (2011–2025): Full system support from race pipes to turbo-back exhausts
6.4L Powerstroke (2008–2010): DPF & Cat delete options available
3.0L Powerstroke (2018–2020): DEF and DPF delete kits offered

Cummins Coverage (Ram 2500 / 3500 / 4500)

6.7L Cummins (2007.5–2023): Supports cab & chassis and pickup configurations
5.9L Cummins (2003–2007): Classic straight pipe and delete kits available
5.0L Cummins (Nissan Titan XD): DEF & DPF delete support with tuning recommendations

Duramax Coverage (Chevy / GMC)

6.6L Duramax: Full coverage from LLY / LBZ / LMM to LML and L5P (2001–2024)

L5P (2017–2024): 4” and 5” delete pipes, mufflers, and straight pipe kits
LML (2011–2016): Turbo-back with DEF delete recommended
LMM / LBZ (2007–2010): Support for downpipe and full exhaust replacement

Dieselperf kits are built for exact fitment with no cutting or welding required. Many options include mid-pipe mufflers for reduced sound, making them ideal for street builds, tow rigs, and off-road performance upgrades.

Dieselperf offers DPF delete / eliminator kits for nearly every major diesel truck platform, built for exact fitment and long-term reliability.

Powerstroke DPF Delete Kits:

2018–2020 3.0L Powerstroke DPF delete kit
2011–2025 6.7L powerstroke DPF delete kit
2008–2010 6.4L Powerstroke DPF delete exhaust system

Compatible with 2017 F250 5 Inch Exhaust: DPF-back to turbo-back upgrades available for 2017 F250 Powerstroke. Boost turbo efficiency and fuel economy.

Cummins DPF Delete Kits:

2011–2023 6.7L Cummins DPF delete kit
2003–2007 5.9L Cummins DPF delete pipe
2016–2018 5.0L Cummins DEF elimination kit

2012 6.7 Cummins 5 Inch Turbo Back Exhaust Kits: Built for power and longevity—2012 RAM owners can now unlock true flow and lower EGTs.

Duramax DPF Delete Kits:

2017–2024 6.6L L5P Duramax DPF delete pipe
2011–2016 6.6L LML Duramax DPF delete exhaust system
2007–2010 6.6L LMM Duramax delete pipe
2001–2010 LBZ / LLY / LB7 DPF delete kit
2016–2019 2.8L LWN Duramax DPF delete kit

These kits are fully compatible with Ford F-150/F-250/F-350, Ram 2500/3500, GMC Sierra HD, Chevy Silverado HD, and Nissan Titan XD.

Quick Install Overview – What to Expect

Tools Needed
Basic hand tools: socket set, wrenches, jack stands or a lift.
No welding or special equipment required for most kits.

Install Time
Approx. 2–4 hours depending on vehicle model, pipe diameter (4" or 5"), and whether it's a DPF-back, turbo-back, or full delete system.

Tuning Required
Yes — All DPF delete kits, DEF delete kits, and EGR delete kits require an ECU reprogram via a compatible diesel tuner. This disables regen cycles and prevents error codes.

What's Included

Printed installation manual

Digital step-by-step video (QR code)

Technical support from SPELAB specialists

Install Options
DIY-friendly for experienced users. First-timers may prefer professional installation, especially for turbo-back delete kits on newer trucks like the 2021 F250 6.7 Powerstroke or 2020 Ram 3500 Cummins.

Step-by-Step Installation Process

Installing a DPF delete kit is a straightforward process for most diesel trucks. Here’s a basic overview:

Lift the vehicle safely using jack stands or a shop lift

Locate and dpf replacement, which is typically bolted under the mid-section of the truck

Install the new DPF delete pipe using the included clamps and hardware—no welding or cutting is needed for most models

Ensure all hangers and flanges are secure, and double-check clearance

Flash the ECU with a compatible diesel tuner to disable the DPF system and prevent warning lights

Start the engine and inspect for leaks or alignment issues

All-in-One Kit Options & Custom Combos

For diesel enthusiasts seeking maximum power and installation convenience, SPELAB offers a variety of All-in-One upgrade packages that combine key systems—DPF Delete, EGR Delete, DEF Delete—with optimized exhaust setups like Race Pipes, Turbo-Back Systems, or 5-inch Downpipe-Back Kits.

Popular Kit Combos:

L5P Delete Pipe + 5” Exhaust + Tuner – for 2017–2024 L5P Duramax

LML Race Pipe + DEF Delete + EGR Block Off – for 2011–2016 LML

6.7 Cummins 5” Turbo-Back + CCV Reroute + Cold Air Intake – for 2013–2022 Ram 2500/3500

6.4 Powerstroke DPF Delete Pipe + Downpipe + Resonator Delete – for 2008–2010 F-250/F-350

These combinations can be customized or pre-selected on the product pages. All kits are model-specific and bolt-on, reducing installation time while unlocking serious gains in horsepower, torque, and sound quality.

Deselperf also offers bundle discounts and free expert consultation, helping you build the perfect setup tailored to your engine and driving needs.

1. Will a DPF delete trigger warning lights or error codes?

Yes—if not tuned. All DPF delete kits must be paired with proper ECU tuning. Without it, your truck may enter limp mode or show engine warning lights.

2. Is this legal for road use?

No – off-road use only.
Dieselperf's diesel delete kits are intended for race/off-road use in regions where emissions compliance is not enforced. It is the buyer's responsibility to ensure legal use in their area.

3. Can I install a DPF delete kit myself?

Yes—many of our customers are DIY installers. dieselperf kits include:

Precise, model-specific design (no cutting or welding)

Diagrams & written instructions

Online tutorials and tech support

A basic mechanical skillset and tools (ratchet, clamps, jack stands) are typically all that’s required. However, professional installation is recommended for tuning.

4. How long does shipping take?

We offer fast shipping across the U.S. and Canada, typically within:

3–7 business days in the U.S.

5–10 business days to most Canadian provinces

Tracking is provided on all orders. Expedited shipping available at checkout.

5. How do I know which kit fits my truck?

Use our vehicle filters or consult our support team. You’ll need to know:

Engine type (e.g., 6.7L Cummins, LML Duramax)

Model year (e.g., 2011–2023)

Cab/chassis or pickup body type

Inlet size preference (4" or 5")

We're happy to help confirm fitment before you order.

6. How long does DPF regeneration take?
Most diesel trucks take 20–45 minutes to complete a DPF regen. It usually happens every 300–500 miles, depending on driving conditions.

With a dieselperf DPF delete kit and proper tuning, regen cycles are fully eliminated, improving power and fuel efficiency.