Please use your USB cable and upload the new offroad calibration to your AutoCal using your WINDOWS 10+ PC.
The software you require from EFILive can be found here:
https://www.efilive.com/download-efilive
The user manual for the EFILive AutoCal v3 can be found here:
https://content.efilive.com/documents/AutoCal%20V3%20User%20Guide.pdf
Here is a video on uploading the tune files as well, incase the written instructions aren't clear enough.
https://www.youtube.com/watch?v=hJ7yu3QoRnQ
Please update your autocal firmware prior to loading your new off-road tune file. not doing so may cause compatibility issues and damage your ecm:
1) Select "Check for Updates" on the EFILive V8 Scan and Tune software homepage. If your software is out of date, please select the option to update.
2) Select "Check Firmware" on the EFILive V8 Scan and Tune software homepage. On this window, please choose the option to update the Firmware Version and the Configuration Files.
Once these steps are completed, you should be able to now re-program your AutoCal device.
AutoCal Reprogramming Instructions Overhead:
Please use efilive scan and tune, and not explorer unless told too.
Program Quick Setup
The Quick Setup is the quickest and easiest way to program all files required to
make AutoCal functional.
This method requires your tune provider to send you a *.bbx quick setup file via email.
1. Save the *.bbx file your tuner sent to the folder:
\Documents\EFILive\V8\BBX (Or, in your Downloads/Desktop folder)
2. Connect AutoCal to your PC and open V8 Scan and Tune software.
3. Navigate in the V8 software to [F5: BBX]->[F6: Quick Setup]
4. Select [Open Quick Setup] and navigate to the directory and select the
*.bbx file your tune provider sent you.
5. Do not modify any of the settings defined by your tune provider unless they request
you to.
6. Select [Program Quick Setup] to program device settings, controller
configuration and tune files to your AutoCal.
*If you have a 2018+ Dodge Ram diesel trucks off-road vehicle, please remember to install the bypass cable prior to re-flashing your truck*
Ensure you are not altering any electronic accessory during the flashing process, this includes the radio, opening and closing doors, rolling down the window, etc.
